ASTM A139 Pipe

Short Description:

Types: Welded & EFW
Size: 4″ To 36″
Grade: Grade A, Grade B, Grade C, Grade D, Grade E
Schedule: 5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XS, XXS, STD
Length: Double Random & Required Length, Single Random, & Custom Size Available
Shape/Form: Round Pipes & Tubes, Hydraulic Tubes, Square / Rectangular Pipes & Tubes Coiled Tubes, “U” Shape Pipes & Tubes.
End: Plain End, Beveled End, Treaded Protected With Plastic Caps
Coating: Anti-Corrosion Oil, Galvanised Finish, Black Painting, Finish as per Customer Requirements

Send email to us

Product Detail

Product Tags

This specification covers five grades of electric-fusion (arc)-welded straight-seam or spiral-seam steel pipe in 4" to 92" inclusive with wall thickness up to 1 " inclusive.

Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification and the grades of steel of the manufactured pipes. The pipe is intended for conveying liquid, gas, or vapor.

SPECIFICATION ASTM A-139

*SPECIFICATION* ASTM A-139
*MIN MECHANICAL PROPERTIES*
STEEL GRADE	Tensile strength ,min Ksi ( Mpa )	Yield strength,min Ksi ( Mpa )	Elongation in 2 inches (50 mm)% min
A-139 GRADE A	48 ( 330 )	30 ( 205 )	( 5/16 / 7.9mm ) 35 %
A-139 GRADE B	60 ( 415 )	35 ( 240 )	( 5/16 / 7.9mm ) 30 %
A-139 GRADE C	60 ( 415 )	42 ( 290 )	( 5/16 / 7.9mm ) 25 %
A-139 GRADE D	60 ( 415 )	46 ( 315 )	( 5/16 / 7.9mm ) 23 %
A-139 GRADE E	66 ( 455 )	52 ( 360 )	( 5/16 / 7.9mm ) 22 %

A139 Grade B Pipe Chemical Composition

	C	Mn	P	S
Grade A:	.25	1.00	.035	.035
Grade B:	.26	1.00	.035	.035
Grade C:	.28	1.20	.035	.035
Grade D:	.30	1.30	.035	.035
Grade E:	.30	1.40	.035	.035

ASTM A139 Steel Pipe Size Chart

We have wide selection of ASTM A139 Grade B Steel Pipe Dimensions

NB Sizes	Sch 5	Sch 10	Sch 40	Sch 80	Sch 160
1/2	✔	✔	✔	✔
3/4	✔	✔	✔	✔
1	✔	✔	✔	✔
1.25	✔	✔	✔	✔	✔
1.5	✔	✔	✔	✔	✔
2	✔	✔	✔	✔	✔
2.5	✔	✔	✔	✔	✔
3	✔	✔	✔	✔	✔
3.5	✔	✔	✔	✔	✔
4	✔	✔	✔	✔	✔
5	✔	✔	✔	✔	✔
6	✔	✔	✔	✔	✔
8	✔	✔	✔	✔	✔
10	✔	✔	✔	✔	✔
12	✔	✔	✔	✔	✔
14	✔	✔	✔	✔	✔
16	✔	✔	✔	✔	✔
18	✔	✔	✔	✔	✔
20	✔	✔	✔	✔	✔
22	✔	✔	✔	✔
24	✔	✔	✔	✔

ASTM A139 GR B Pipe Pressure Rating

		OUTSIDE DIAMETER		WALL THICKNESS		WEIGHT OF BLACK PIPES
NOMINAL PIPE SIZE		STANDARD		STANDARD		PLAIN END PIPES				TEST PRESSURE
INCH	MM	INCH	MM	INCH	MM	KG/MTR	MTR/TON	LB/FT	FT/TON	PSI	KPA
3/4	20	1.050	26.7	0.083*	2.11	1.28	781	0.86	2562	700	4830
1	25	1.315	33.4	0.109*	2.77	2.09	478	1.41	1568	700	4830
1.1/4	32	1.660	42.2	0.109*	2.77	2.69	372	1.81	1221	1000	6890
1.1/2	40	1.900	48.30	0.109*	2.77	3.11	322	2.09	1056	1000	6890
2	50	2.375	60.3	0.109*	2.77	3.93	254	2.64	833	1000	6890
2.1/2	65	2.875	73.0	0.120*	3.05	5.26	190	3.53	623	1000	6890
3	80	3.500	88.9	0.120*	3.05	6.46	155	4.34	509	1000	6890
3.1/2	90	4.000	101.6	0.120*	3.05	7.41	135	4.98	443	1200	8270
4	100	4.500	114.3	0.120*	3.05	8.37	119	5.62	390	1200	8270
5	125	5.563	141.3	0.134*	3.40	11.58	86	7.78	283	1200	8270
6	150	6.625	168.3	0.134*	3.40	13.85	72	9.30	237	1000	6890
8	200	8.625	219.1	0.188**	4.78	25.26	40	16.96	130	800	5520

Tolerance

PERMISSABLE VARIATIONS IN WEIGHTS AND DIMENSIONS	Weight The weight of any length of pipe shall not vary more than 10% over the specified weight. The weight of any length of pipe shall not vary more than 5% under the specified weight when the specified wall thickness is 0.188" or less or more than 5.5% under when the wall thickness is greater than 0.188". Thickness The minimum wall thickness at any point shall be not more than 12.5% under the nominal wall thickness. Circumference The pipe shall be substantially round. The outside circumference of the pipe shall not vary more than 1.0%, but not exceeding ¾ in. from the nominal outside circumference based upon the diameter specified, except that the circumference at ends shall be sized, if necessary, to meet the requirements of Section 15. Straightness Finished pipe shall be commercially straight. When specific straightness requirements are desired, the order should so state and be agreed upon between the purchaser and the manufacturer.
LENGTHS	The tolerance of the specified lengths is of ± ½².
FINISH OF THE ENDS	Pipe shall be furnished with an angle cut of 90° or beveled ends as specified. All burrs at the ends of pipe shall be removed. When pipe ends have to be beveled for the welding, the ends shall be beveled on the outside to an angle of 35° with a tolerance of ± 2½° and with a width of root face 1/16" ± 1/32".
FINISH OF THE PIPES	The repair by manual or automatic arc welding of defects in the pipe wall will be permitted, provided their depth does not exceed 33% the specified wall thickness. Defects in the welds, such as sweats or leaks, shall be repaired or the piece rejected at the option of the manufacturer. Repairs of this nature shall be made by completely removing the defect, cleaning the cavity, and then welding. All repaired pipe shall be subject to hydrostatic testing.
NUMBER OF PRODUCTION TEST SPECIMENS	One longitudinal tension test specimen shall be made from the steel of each heat, or fraction thereof, used in the manufacture of the pipe. One reduced-section production weld test specimen shall be taken from a length of pipe from each lot of 3000 ft. of pipe, or fraction thereof, of each size and wall thickness.
MARKING	Each section of pipe shall be marked with the manufacturer’s distinguishing marking, the specification number, the grade of pipe, and other marking if required and agreed upon between the purchaser and the manufacturer.